Designed for applications with limited space and for
low flow or dead end service
Small package size and lightweight construction
Standard or low bleed versions available
Corrosion resistant anodized aluminum exterior
Excellent stability and repeatability
Self relieving
Low cost
Product Detail:
Type 91
The Type 91 Subminiature Regulator is a compact, low-cost unit which operates in pressure ranges up to 100 psi , with a maximum supply pressure of 250 psi. It provides dependable reliability and accuracy for low flow or dead end applications, but is not designed for critical flow applications. The Type 91 subminiature regulator is available with a corrosion resistant anodized aluminum body and bonnet or with a brass body and bonnet. Both come standard with a fluorocarbon diaphragm.
Type 91 Low Bleed
The Type 91 low bleed version is designed for applications where low air consumption is required. The Type 91 is ideal for applications where space is limited and for dead ended/low flow service. Such applications include ink control on printing presses, panel loading applications, hand-held analyzers and calibration equipment, small cylinder operations, and all types of instrumentation applications. It can be through panel mounted or, due to its lightweight, pipe mounted. A slotted adjustment screw is available for precision control.
Part Numbers:
Part Number
Port Size (NPT)
Set Point Range
BAR
psig
T91
960-240-000
1/16" NPT
0-0.3
0-5
960-236-000
0-1.0
0-15
960-237-000
0-2.1
0-30
960-238-000
0-4.1
0-60
960-239-000
0-6.9
0-100
T91
962-036-000
5mm
0-0.3
0-5
962-083-000
0-1.0
0-15
962-033-000
0-2.1
0-30
962-034-000
0-4.1
0-60
962-035-000
0-6.9
0-100
Options:
Replace the last three digits of the part number with digits from the table below. If more than 2 combination needed, Consult Factory.
點(diǎn)擊圖片查看原圖
